Vamo V5 Advantages:
The Vamo V5 is a variable voltage electronic cigarette. The Vamo V5 comes with a standard 510 style connector which gives you a freedom to use any 510 threaded atomizer!
Four button on the Vamo V5:
1) — Power button (Red): Hold this down for 5 seconds to turn the device on/off.
2) — Fire button (Black): Once powered on the fire button will activate your atomiser at the set voltage.
3) — Voltage adjustment buttons (Silver): Use the “+” and “-” buttons to adjust the voltage in 0.1V steps. Once 6.0V is reached the voltage will step back to 3.0V if you push the “+” button again.
The LCD screen is simple, easy to read. It simply displays the voltage as you set/change it using the voltage set buttons.
4) — In addition the Vamo V5 has a “lock” feature. Simply press and hold the 2 silver voltage adjustment buttons for 5 seconds and it will lock the voltage. This is useful as it means you can’t accidentally change the voltage!
Vamo V5 Specifical Features:
Ample safety! TheVamo V5 Mod comes with built in circuit/switch protection. This means that you cannot push the switch over 2.5amps of load. The great thing about this is that rather than simply not working/displaying an error the Lava tube will automatically put the voltage down to an acceptable level and carry on working!
TheVamo V5 also has regulated voltage output which keeps the voltage exactly the same each time you use it. As your 18650 battery continues to drain the Lava tube regulated voltage will always output at the same level!
Activation protection cuts in at 10 seconds. This means if you try and use the Lava tube for longer than 10 seconds it will simply cut off in order to protect you and your atomisers!
Reverse battery protection: total weight of e-cigarette is 175 grams
Don’t worry if you put the battery in the wrong way the device simply won’t work. In addition to this, if your battery becomes discharged the Lava tube will protect itself .
It offers both variable voltage and variable wattage modes, and can increase power by .1 volts or .5 watts. This device can stably operate between 3.0-6.0 volts or 3.0-15.0 watts.
1.To turn the device on or off press the big button 5 times in 2 seconds.
2.To switch between the VV and VW mode press and hold both mini buttons at the same time.
3.Use the left and right mini buttons to increase and decrease the voltage or wattage.
4.To check the remaining battery voltage press and hold the left mini button for 5 seconds.
5.To check the your devices resistance (ohms) press and hold the right mini button for 5 seconds.
6.This device will work with one 18350 or one 18650 lithium ion battery. We do NOT suggest stacking batteries. If you stack batteries you will void your warranty. This device will not function properly with protected batteries, and using them will void your warranty.
7. To switch between AVG and RMS mode press and hold the left or right mini button for ten seconds. It will display NO1 when it is in AVG mode and NO2 when it is in RMS mode.
This device has the following protective features.
1.When you press the big button for 10 seconds or more the device will shut off.
When using a single battery and the voltage drops below 3.2 volts the screen will display “LO”. Please recharge your battery before continuing to use it.
2.When using two batteries and the voltage drops below 6.4 volts the screen will display “LO”. Please recharge your batteries before continuing to use them.
3.When you use an atomizer at 1.2ohm or less the screen will display a “LO” ohms warning. Please use a higher resistance atomizer to prevent damaging your device.
4.When you are using an atomizer with a short the screen will display “LO v”. Please change your atomizer to prevent damaging your device.
5.The device will not work if you put the batteries in incorrectly. Please remove and replace the batteries with the positive end towards the top of the device.
Please note the Vamo V5 is not compatible with the Innokin Iclear 30 tank.